- Your cart is empty
- Continue shopping
Shop
Hikvision DS-3E1510P-EI-M 10-Port Smart Managed PoE Ethernet Switch
High-performance smart PoE switch with 8 gigabit PoE ports, 2 uplink RJ45 ports, VLAN support, PoE watchdog and extended transmission up to 300 m — perfect for powering and managing CCTV cameras and network devices.
The Hikvision DS-3E1510P-EI-M 10-Port Smart Managed PoE Ethernet Switch is a reliable network solution for small to medium-sized surveillance and business networks. It offers 8 gigabit PoE-enabled ports alongside 2 high-speed uplink RJ45 ports, allowing you to power IP cameras, access points, VoIP phones, and other PoE devices over the same Ethernet cables you use for data — cutting down on clutter and power adapters.
With support for IEEE 802.3af/at PoE standards and a total PoE power budget of 60 W, this switch delivers steady power to connected devices while keeping data moving smoothly. Smart features like 802.1Q VLAN support, PoE watchdog that detects and restarts unresponsive cameras, and STP/RSTP loop prevention help keep your network reliable and easy to manage. Plus, extended PoE transmission up to 300 m lets you position cameras further from the switch without needing extra injectors.
Built with a compact metal casing and surge protection, this switch is ideal for CCTV setups, small office networks, or any installation where you want dependable PoE power and smart control in one device.
| Shell | Metal material |
|---|---|
| Net Weight | 0.54 kg (1.19 lb) |
| Gross Weight | 1.08 kg (2.38 lb) |
| Dimensions (W × H × D) | 217.6 mm × 27.6 mm × 108.5 mm (8.57'' × 1.09'' × 4.27'') |
| Power Supply | 54 VDC, 1.2 A |
| Installation Mode | Desk-Mounted, Wall-Mounte |
| Ports | 8 × Gigabit PoE port,2 × Gigabit RJ45 port |
| MAC Address Table | 4 K |
| Switching Capacity | 20 Gbps |
| Internal Cache | 1.5 Mbits |
| PoE Standard | IEEE 802.3af,IEEE 802.3at |
| PoE Power Pin | End-span: 1/2(-), 3/6(+) |
| PoE Port | PoE: Ports 1 to 8 |
| Max. Port Power | 30 W |
| PoE Power Budget | 60 W |
| Long Range | Ports 1 to 8: up to 300 m. Long range performance may vary depend on camera model or cable condition. |
| Port Isolation | Ports 1 to 8: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. |
| VLAN | VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN. |
| HPP | Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device. |
| System Maintenance | Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating. |
| EMC | CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020) |
| Safety | CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017) |
Related products
Customer reviews
Reviews
There are no reviews yet.
Write a customer review